Woodward 8440-2050 easYgen-3200-5/P1 Genset Controller

8440-2050 is the easYgen-3200-5/P1 genset controller for generator measurement, breaker control, synchronization, load sharing and multiple-unit operation. Its 5 A CT package must match the installed current-transformer secondary, wiring and configured generator system.

8440-2050 is the 5 A CT-input version of the front-mounted easYgen-3200 P1 controller. A 1 A CT installation requires the corresponding Woodward variant, so the CT secondary rating must be verified before replacement or commissioning.

8440-2050 is configured for front-panel mounting with a color graphical display. It is not the cabinet-back version without a display; confirm the panel cutout, connector access, enclosure depth and operator-display requirement before installation.

8440-2050 provides two FlexCAN interfaces plus one RS-232 and one RS-485 Modbus RTU slave interface within the easYgen-3200 package. The active protocol, node settings, termination and connected devices must match the saved controller project.

8440-2050 supports easYgen-3200 applications including isolated, island-parallel, mains-parallel and multiple-unit mains-parallel operation. The breaker arrangement, generator count, load-sharing network, protection settings and plant operating sequence must be engineered for the actual installation.

8440-2050 replaced the earlier 8440-1923 part number when Woodward adopted a color display for the easYgen-3200. Settings files can share common parameters, but newly introduced or removed parameters must be reviewed and updated manually.

8440-2050 requires confirmation of the complete part number, P1 package, 5 A CT inputs, panel mounting, connector wiring, hardware revision, firmware, settings file and load-sharing topology. Compatibility should be verified before transferring configuration or energizing the generator system.