The ABB 3HNA013276-001 is a two-piece repair kit for PPRU booster Channel 1 or Channel 2 in a three-channel PPRU assembly.
PPRU channel 1 or 2 repair kit · PPRU 3-channel unit.
3HNA013276-001 is the 3HNA013276-001 provides the documented repair parts for PPRU booster Channel 1 or Channel 2; it is not identified as a complete PPRU assembly.
Confirm the PPRU has three channels, identify whether Channel 1 or Channel 2 is being serviced, isolate pressure and electrical energy, and check that the two-piece kit is complete before installation.
Source: ABB CS-0268 repair-kit document, 3HNA013308-001 Rev.01. Verify 3HNA013276-001 against the installed PPRU 3-channel unit and the complete manufacturer article number.
Manufacturer-reference information for the ABB 3HNA013276-001 PPRU channel 1 or 2 repair kit used with a compatible PPRU 3-channel unit.
The official manufacturer document 3HNA013308-001 Rev.01 identifies 3HNA013276-001 as a PPRU channel 1 or 2 repair kit for PPRU 3-channel unit.
OFFICIAL DATASHEET ↗Send the complete part number, quantity, provide the ppru label, affected channel and kit packaging. and your technical or purchasing question.
Technical statements on this page are limited to ABB manufacturer-reference documentation. No third-party product sources were used.
ABB ↗ is the manufacturer. 3HNA013276-001 is the complete spare-part number and must be matched to the installed PPRU 3-channel unit, Two-piece channel repair kit and documented hardware configuration.
PPRU channel 1 or 2 repair kit.
Verify the installed PPRU channel, booster hardware and service condition.
Match Two-piece channel repair kit and the complete article number 3HNA013276-001.
Do not use the kit for Channel 3 or replace the full PPRU unless the maintenance plan requires it.
Match 3HNA013276-001 to the manufacturer documentation, equipment identification and installed PPRU channel 1 or 2 repair kit.
Record the affected channel and photograph the original tubing and connections.
Use ABB CS-0268 repair-kit document 3HNA013308-001 Rev.01 and the installed equipment identification to verify the exact part number.
Confirm the PPRU has three channels, identify whether Channel 1 or Channel 2 is being serviced, isolate pressure and electrical energy, and check that the two-piece kit is complete before installation.
A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.
Include the complete part number, quantity and delivery destination.
Machinery monitoring and protection models
Cross-industry models for broader sourcing enquiries
IPv6 network supported
| Sitemap
| XML
| Private Policy
| Terms and Conditions
MAIL US
CAIL US
Tell Us Your Needs !
