Siemens 6ED1052-2HB08-0BA0 LOGO! 24RCEo Logic Module

6ED1052-2HB08-0BA0 is a display-free Siemens LOGO! 8 24RCEo base logic module. It reads eight 24 V AC/DC digital inputs and operates four relay outputs for compact switching and timing applications; the program and connected loads determine the actual control task.

6ED1052-2HB08-0BA0 uses a 24 V AC/DC supply, and Siemens specifies eight 24 V AC/DC digital inputs. Match both the supply and field-input wiring to this exact 24RCEo variant rather than assuming the ratings of a 12/24 V or 230 V LOGO! unit.

6ED1052-2HB08-0BA0 is listed with eight digital inputs, not built-in analog inputs. Siemens distinguishes this 24RCEo variant from LOGO! variants whose digital inputs can also serve as analog inputs; confirm any required analog expansion separately.

6ED1052-2HB08-0BA0 has four relay outputs. Siemens lists 10 A maximum for resistive loads and 3 A maximum for inductive loads, and states that external fusing is necessary because the relay outputs do not provide short-circuit protection.

6ED1052-2HB08-0BA0 mounts on a 35 mm DIN rail and occupies four spacing units. Siemens lists 400 interconnectable function blocks, an integrated time switch and Ethernet; verify the installed functional status before using firmware-dependent software or communication features.

6ED1052-2HB08-0BA0 includes an Ethernet interface and integrated web server. Check the intended LOGO! Soft Comfort version, network address plan and installed module configuration before commissioning.

6ED1052-2HB08-0BA0 should be specified by its complete Siemens article number, required quantity and installed LOGO! functional status. Include the 24 V AC/DC supply, relay-load requirements and any planned expansion modules so the requested configuration can be checked accurately.