The 1761-L16BWA is a compact programmable controller with 10 digital 24 V DC inputs, 6 relay outputs and a 120/240 V AC input supply.
Brand :
PLCPart Number :
1761-L16BWAWeight :
Verify from the exact assembly labelDimension :
Verify enclosure clearance and mounting dimensions from publication 1761-IN001Country of Origin :
USAHS Code :
ML 1000 Programmable ControllerDescription :
The 1761-L16BWA is a compact programmable controller with 10 digital 24 V DC inputs, 6 relay outputs and a 120/240 V AC input supply.Click “+” to expand more specifications.
Source: Official publication 1761-IN001 covers 1761-L16BWA. Verify the nameplate, electrical configuration, wiring, firmware and saved project before replacement.
1761-L16BWA is a compact programmable controller with 10 digital 24 V DC inputs, 6 relay outputs and a 120/240 V AC input supply. It must be installed with the stated electrical and system configuration.
1761-L16BWA is configured as 10 DC inputs · 6 relay outputs · AC supply. The installed terminals, field devices and project must match this exact catalog number.
1761-L16BWA uses Use the communication interface and cable specified by the installed controller. The protocol, addresses, cables and saved controller project must match the installed system.
1761-L16BWA requires 120/240 V AC input supply. Confirm the enclosure, mounting, grounding, terminal wiring and applicable environmental limits before energizing the unit.
1761-L16BWA should not be replaced solely because another unit looks similar. The complete catalog number, electrical version, I/O or processor configuration, firmware and project compatibility must all be verified.
1761-L16BWA inquiries should include clear nameplate photographs, quantity, hardware series, firmware, installed base or controller, field wiring, communication settings and project-backup status.
Official manufacturer-reference information for the 1761-L16BWA ML 1000 Programmable Controller.
Official publication 1761-IN001 covers identification, installation, wiring, configuration and operating requirements for this catalog variant.
OFFICIAL MANUALSend the complete model, quantity, nameplate photos and your technical or purchasing question.
Technical statements on this page are limited to official publication 1761-IN001. No third-party product sources were used.
PLC is the product-family reference. 1761-L16BWA must be matched to the complete nameplate, electrical configuration, I/O or processor arrangement, firmware, wiring and saved project.
Record the installed controller or base, expansion I/O, network design, firmware and adjacent equipment.
Photograph communication connections, removable terminals, field wiring and grounding before disconnecting the controller.
Verify the 120/240 V AC supply, 24 V DC input circuits and relay load ratings before energizing.
Do not select a substitute until the point count, electrical version, terminal wiring, processor series and recoverable project backup are confirmed.
Match 1761-L16BWA and its complete suffix to the full nameplate and installed-system documentation.
Create a recoverable copy of the controller project and record firmware, communication and I/O parameters before removal.
Record the network or serial protocol, addresses, cables, supply and I/O wiring used by the installed application.
Confirm catalog number, firmware, I/O or processor configuration, ports, power, wiring and project compatibility before commissioning.
A clear workflow for sourcing, verification, shipment preparation, delivery and product assurance.
Include the complete part number, quantity and delivery destination.
IPv6 network supported
| Sitemap
| XML
| Private Policy
| Terms and Conditions
MAIL US
CAIL US
Tell Us Your Needs !
