GE | DS200SDCCG4RGD | Turbine board

Product Description：

The GE Drive Control Board DS200SDCCG4RGD is the primary controller for the drive. The GE Drive Control Board DS200SDCCG4RGD is populated with 3 microprocessors and RAM that can be accessed by multiple microprocessors at the same time. The GE Drive Control Board DS200SDCCG4RGD contains EPROM chips that must be removed from the defective board and installed in the replacement board. Four of them contain the configuration files defined at the factory for the board. One contains configuration files that the site defines for the specific function of the board. So when you replace the board, you must carefully swap the EPROMs from the old board to the replacement board.

One consideration is that the EPROMs are highly sensitive to static and can lose the information stored on them. Make sure you wear a wrist strap to drain off any static that is present on the board or your body. The wrist strap can be clipped to a bare metal surface on the workbench or other metal structure. Other wrist straps are designed with a plug-in connector that you can connect to a connector on the workbench. Another best practice is to always keep the board in the protective bag in which you received it.  The bag protects the board from static.