ABB DSQC Robot Spare Parts: Why the DSQC Number Alone Is Not Enough
A practical buying reference built around Moore-listed DSQC661, DSQC679 and DSQC617 products.
A request for “one DSQC module” may identify a family, but not the part to order. Use the failure report to locate the assembly, the complete original nameplate to identify the candidate spare, and the installed IRC5 configuration to verify the final match.
DSQC661: confirm the system power supply, not just a power fault
Moore lists DSQC661 3HAC026253-001 as a power supply. The ABB IRC5 product manual identifies it as the system power supply and lists DSQC662 3HAC026254-001 separately as the power distribution unit. “Cabinet has no power” does not prove which one has failed.
DSQC661 3HAC026253-001System power supplyDSQC662 3HAC026254-001Power distribution unit; not the same RFQAlarm details, relevant indicators, a photograph of the removed unit’s complete nameplate and its position in the cabinet. A qualified technician should establish the fault under the applicable ABB procedure.
DSQC679: establish whether the request is for a full pendant or a component
Moore has a listing marked DSQC679 USB3HAC028357-024. ABB’s SxTPU3 spare-parts page identifies 3HAC028357-001 as a main board for the DSQC679 series and states that RobotWare RW5.07.02 or later is required for that ABB-listed item.
USB3HAC028357-024Confirm the physical item and supply scope3HAC028357-001SxTPU3 main board; a different exact stringDSQC617: one family name, multiple Moore-listed order numbers
Moore’s multilingual site presents three separate DSQC617 main servo-drive listings. An inquiry for “DSQC617” alone cannot tell a reseller which of these complete articles the customer has installed.
| Full order number | Moore product record | Check before quoting |
|---|---|---|
3HAC14546-1 | Open listing → | Original drive nameplate and installed configuration |
3HAC14546-2 | Open listing → | Suffix and drive-module position |
3HAC14546-4 | Open listing → | Installed IRC5 drive-module build |
Separate listings do not prove these variants are interchangeable. A proposed replacement must be checked against the original unit and applicable ABB documentation.
Related but separate: Moore also lists the 3HAC032595-001 MDU/ADU 24 V harness. ABB’s IRC5 manual identifies it for a first additional-drive-unit installation. It is a harness, not a servo-drive substitute; confirm drive position and wiring before including it in an RFQ.
Exact-number references for ABB robot spare-part inquiries
Use the arrows to review six related Moore listings. These cards are sourcing references only; confirm the complete original article number, installed position and controller configuration before ordering.
Open a ready-to-send RFQ outline
Copy the fields below into an email and complete them from the installed equipment. ABB notes that a robot serial number can help identify suitable spares.
Show the exact-part inquiry template
Questions buyers ask about ABB DSQC spares
Use these checks to separate a family designation from the complete orderable assembly.
Is a DSQC number enough to identify the correct spare part?
No. Treat the DSQC number as a family reference. Match the complete ABB article number, the removed unit’s nameplate, controller and robot identification, installed position and relevant software details before ordering.
Can DSQC617 3HAC14546-1, -2 and -4 be treated as interchangeable?
No interchangeability is established here. They are separate complete article numbers. Verify the full suffix, installed drive-module build, cabinet position and controller configuration against the original unit.
Does a DSQC679 request always mean a complete teach pendant?
No. State whether the request is for a complete handheld assembly or an internal component. Send the full label, clear photographs, connector details, controller identification, robot serial number and RobotWare version.
What evidence should accompany a DSQC661 power-system inquiry?
Send alarm details, relevant indicators, the complete nameplate and a cabinet-position photograph. Distinguish DSQC661 3HAC026253-001 system power supply from DSQC662 3HAC026254-001 power distribution unit.
The rule: the DSQC designation starts the search; the complete ABB article number identifies the candidate; the installed robot and controller records determine whether it is the right replacement.
Check Moore inventory →Send the complete ABB DSQC number to Frida
For a faster exact-model check, attach the full nameplate, controller and robot identification, RobotWare version, clear photographs, required quantity and delivery destination.
MAIL US
CAIL US







Tell Us Your Needs !
IPv6 network supported
|