Bently Nevada 102045-040-01-05 3300 XL Armored Extension Cable

102045-040-01-05 is a legacy Bently Nevada reference for a 4.0 m armored extension cable connecting a compatible 3300 XL probe to its Proximitor Sensor. It is a calibrated system component, not general-purpose coaxial cable.

102045-040-01-05 uses a legacy base reference, while current Baker Hughes data defines the same 4.0 m armored multiple-approval configuration under the 330130 family. Confirm the installed label and connector before substitution.

102045-040-01-05 provides 4.0 m of electrical length, so a 1.0 m compatible probe is normally paired with it for a 5.0 m Proximitor system. The exact calibrated system length must match.

102045-040-01-05 uses armored -01 construction, so a non-armored version changes mechanical protection and routing conditions. Connector, total length, environment and approvals must also match.

102045-040-01-05 identifies the multiple-approval configuration associated with CSA, ATEX and IECEx markings. The destination hazardous-area requirements and installed markings still require confirmation.

102045-040-01-05 must be routed without exceeding bend limits, crushing the armor or contaminating ClickLoc connectors. Confirm electrical length, connector engagement, shield condition, temperature and mechanical protection.

102045-040-01-05 should be quoted with the full legacy reference, label and connector photos, quantity, destination, installed probe and Proximitor numbers, total system length, armor requirement and hazardous-area class.